Geotechnical Questions with the tag: Soil Mechanics / Geotechnical
Welcome to the GeoWorld's Q&A!
Here you can find information on a wide variety of geotechnical topics. You can ask questions and get answers from real experts, geoprofessionals and members of GeoWorld. You can also browse through the questions, post your answers about topics you are familiar with, and rate the answers of other members.
Take active part in the Q&A!
By participating in the new GeoWorld's Q&A you will benefit by learning and networking and may be recognized as a Q&A expert.
Need help on using GeoWorld's Q&A? See our guide here
-
please tell me about the equation of rock wedge failure with subsaturated water condition and seismic loading?Last answered 10/05/2018 20:30, updated: 10/09/2023 07:12 by Someone
1Answer
-
A P-Y based method for the load-deflection analysis of a single pile on the basis of the in-situ tests was devleopped in the dept. of Civ. Eng at the …Asked 07/04/2018 20:58 by Ali Bouafia
0Answers
-
i want know about monitoring in geotechnic and how can i start programing or use softwares to catch to this goal?Asked 05/04/2018 14:15 by Someone
0Answers
-
do i get any notes for forensic geotechnical engineering???Asked 19/03/2018 16:53 by Prajwala B S
0Answers
-
Hello does any one possess this reference Liquid and Plastic Limits as Determined from the Fall Cone and Casagrande M…Last answered 18/03/2018 17:15, updated: 10/09/2023 07:17 by Dimitrios Zekkos
3Answers
-
The landfill has to be constructed on top of the following profile: 0) silty sand (10 m) underlain by 1) Fractured clay till (20 m) un…Last answered 17/03/2018 01:03, updated: 11/09/2023 00:08 by Sally Simpson
1Answer
-
good day i want to ask about the parametrs that would be constat during compaction of the soil such as weightLast answered 17/03/2018 01:00, updated: 10/09/2023 07:41 by Sally Simpson
1Answer
-
Anyone know how can i get hold of this thesis? Badly needed. Thank you very much.Last answered 17/03/2018 00:49, updated: 10/09/2023 07:41 by Sally Simpson
1Answer
-
Is there anyone know how to find plate capacity in grouted tie back modelling? I want to make a cable bolting modelling. Is it a force of te…Asked 07/03/2018 09:55 by Cyrillus Arthur Saputra
0Answers
-
If I make soil column of clay at a particular density say at air dried density and then I make contact of this soil column to the water reservoir then…Asked 01/02/2018 14:04 by Ankit Srivastava
0Answers
Q&A Experts
5
Posts
0
Upvotes
Civil & Geotechnical Engineering Consulting Company for Structural Engineering, Soil Mechanics, Rock Mechanics, Foundation Engineering, Retaining Structures and Management of Water Resources and Hydraulic Works. at Geodomisi Ltd (www.geodomisi.com)
2
Posts
2
Upvotes
2
Posts
1
Upvote