Geotechnical Questions with the tag: Analysis
Welcome to the GeoWorld's Q&A!
Here you can find information on a wide variety of geotechnical topics. You can ask questions and get answers from real experts, geoprofessionals and members of GeoWorld. You can also browse through the questions, post your answers about topics you are familiar with, and rate the answers of other members.
Take active part in the Q&A!
By participating in the new GeoWorld's Q&A you will benefit by learning and networking and may be recognized as a Q&A expert.
Need help on using GeoWorld's Q&A? See our guide here
-
Hello, I have a question about the soil's internal friction angle in the DYNAMIC ANALYSIS. Whenever we perform dynamic analysis in Plaxis, we have t…Last answered 30/03/2022 09:23, updated: 23/05/2022 07:16 by Sally Simpson
1Answer
-
Please what is the effect of spreading sharp sand in a house foundation before pouring your concrete or before blinding ?Asked 11/03/2022 06:16 by Alexander Apochi George
0Answers
-
I am not a geotechnical engineer, but I have a question concerning the settlement of bay bud with several feet of fill on top, and a high water table.…Last answered 04/01/2022 14:37, updated: 29/01/2022 00:37 by Stephen Buttling
1Answer
-
Can you advise me about the different pressuremeter testing devices and their advantages and disadvantages???Last answered 04/01/2022 14:29 by Stephen Buttling
1Answer
-
Please can someone assist me with GIS water project? It's for academic purposesAsked 08/12/2021 04:32, updated: 08/12/2021 04:33 by Simbarashe Thondhlana
0Answers
-
Dear colleagues I have encountered a problem in modeling a sand bed with a granular cushion on it in Plaxis 2D V20 using the unit cell approac…Asked 25/10/2021 14:35 by Someone
0Answers
-
I have a question on how to determine the coefficient of secondary compression and the intital volumetric strain rate as part of the input parame…Asked 13/08/2021 11:39 by Ahmad Jazzar
0Answers
-
Hi, I am having difficulties modeling the seepage in an earth dam enhanced with a cut off wall using Plaxis 2D. The cut off wall is made …Last answered 27/07/2021 00:31 by Ahmad Jazzar
2Answers
-
Hai,I have a few questions regarding deep excavation analysis with Plaxis. I am trying to explore CBP with 3 level of anchorage for 4 storey basement.…Last answered 26/07/2021 16:47, updated: 30/09/2021 09:42 by Micha Van der Sloot
2Answers
-
Dear GeoWorld community I want to create a 3D Finite Element model in PLAXIS3D based on a fairly detailed UAV mapping of a slope. To reduce the siz…Last answered 20/07/2021 08:07, updated: 20/07/2021 08:08 by Micha Van der Sloot
1Answer
Q&A Experts
2
Posts
1
Upvote
3
Post
0
Upvotes
1
Posts
0
Upvotes