Geotechnical Questions associated with
Welcome to the GeoWorld's Q&A!
Here you can find information on a wide variety of geotechnical topics. You can ask questions and get answers from real experts, geoprofessionals and members of GeoWorld. You can also browse through the questions, post your answers about topics you are familiar with, and rate the answers of other members.
Take active part in the Q&A!
By participating in the new GeoWorld's Q&A you will benefit by learning and networking and may be recognized as a Q&A expert.
Need help on using GeoWorld's Q&A? See our guide here
-
I have a question related to point movement simulation by load multiplier. i would like to know according to whar the multipier will be assigned to th…Last answered 17/11/2023 06:32, updated: 15/12/2023 07:22 by Lojain Suliman
2Answers
-
Hello, Which do you think is the easiest way to model helical piles in PLAXIS 3D?Last answered 17/11/2023 04:35 by Micha Van der Sloot
1Answer
-
Hi, I am having difficulties modeling the seepage in an earth dam enhanced with a cut off wall using Plaxis 2D. The cut off wall is made …Last answered 27/07/2021 00:31, updated: 09/09/2023 10:56 by Ahmad Jazzar
2Answers
-
Hai,I have a few questions regarding deep excavation analysis with Plaxis. I am trying to explore CBP with 3 level of anchorage for 4 storey basement.…Last answered 26/07/2021 16:47, updated: 10/09/2023 07:34 by Micha Van der Sloot
2Answers
-
Hi I have a simulation performed by plaxis 2013, which collapses and it does not converge properly. I would appreciate it if someone could give me …Last answered 26/07/2021 16:42, updated: 09/09/2023 10:37 by Micha Van der Sloot
3Answers
-
I am doing my project on PLAXIS in which I need to check the bearing capacity of soil with air packets and the suitable remidial measure. How can w…Last answered 26/07/2021 16:38, updated: 09/09/2023 10:56 by Micha Van der Sloot
1Answer
-
What is the effect of providing INTERFACE while simulating a model in PLAXIS 3D, what are the significance of POSITIVE INTERFACE and NEGATIVE INTERFAC…Last answered 26/07/2021 16:30, updated: 09/09/2023 10:54 by Micha Van der Sloot
1Answer
-
Dear GeoWorld community I want to create a 3D Finite Element model in PLAXIS3D based on a fairly detailed UAV mapping of a slope. To reduce the siz…Last answered 20/07/2021 08:07, updated: 09/09/2023 10:56 by Micha Van der Sloot
1Answer
-
Hello! I have intermediate knowledge of Python and have mostly used Python for Data Science. I would like to know how can I utilize Python in …Last answered 11/02/2021 07:44, updated: 09/09/2023 10:55 by Eric Woon
2Answers
Q&A Experts
3
Posts
1
Upvote
2
Posts
0
Upvotes
Director, User Success, Geotechnical at Seequent, the Bentley Subsurface Company
2
Posts
0
Upvotes