Employment of the bootstrap method for optimal sensor location considering uncertainties in a coupled hydro-mechanical application
Journal Article published 2019 Feb in Applied Soft Computing volume 75 on pages 298 to 309
Authors: Raoul Hölter, Elham Mahmoudi, Sandra Rose, Markus König, Maria Datcheva, Tom Schanz
http://dx.doi.org/10.1016/j.asoc.2018.11.025

Modelling of a Large Landslide Problem under Water Level Fluctuation—Model Calibration and Verification
Journal Article published 2019 Feb 14 in Geosciences volume 9 issue 2 on page 89
Authors: Xiang Li, Chenyang Zhao, Raoul Hölter, Maria Datcheva, Arash Alimardani Lavasan
http://dx.doi.org/10.3390/geosciences9020089

Using Sigma-Points to Identify Optimal Experimental Design for Dike Monitoring ⁎ ⁎The authors acknowledge financial support provided by the German Science Foundation (DFG) under the framework of subproject C2 in the Collaborative Research Center SFB 837.
Journal Article published 2018 in IFAC-PapersOnLine volume 51 issue 2 on pages 759 to 764
Authors: Raoul Hölter, Elham Mahmoudi, Maria Datcheva, Tom Schanz
http://dx.doi.org/10.1016/j.ifacol.2018.04.005

Evaluation by nanoindentation of technological products manufactured by pulse injection molding process
Journal Article published 2018 in MATEC Web of Conferences volume 145 on page 02006
Authors: Margarita Natova, Ivan Ivanov, Sabina Cherneva, Maria Datcheva, Roumen Iankov
http://dx.doi.org/10.1051/matecconf/201814502006

Optimal measurement design for parameter identification in mechanized tunneling
Journal Article published 2018 Mar in Underground Space volume 3 issue 1 on pages 34 to 44
Authors: Raoul Hölter, Chenyang Zhao, Elham Mahmoudi, Arash Alimardani Lavasan, Maria Datcheva, Markus König, Tom Schanz
http://dx.doi.org/10.1016/j.undsp.2018.01.004

Indentation hardness and modulus of electrochemically deposited triple protective-decorative Cu-Ni-Cr system
Journal Article published 2018 in MATEC Web of Conferences volume 145 on page 02005
Authors: Maria Datcheva, Gergana Chalakova, Antonio Nikolov, Rayna Dimitrova, Roumen Iankov, Valentin Kamburov, Dessislava Guergova, Emilia Stoyanova, Dimitar Stoychev
http://dx.doi.org/10.1051/matecconf/201814502005

Prediction of effective stress in partially saturated sand–kaolin mixtures
Journal Article published 2018 Sep in Geomechanics for Energy and the Environment volume 15 on pages 85 to 94
Authors: G. Heibrock, D. König, M. Datcheva, A. Pourzargar, J. Alabdullah, T. Schanz
http://dx.doi.org/10.1016/j.gete.2018.06.001

Cyclic Response of Natural Onsøy Clay
Book Chapter published 2017 in Holistic Simulation of Geotechnical Installation Processes on pages 275 to 296
Authors: Thomas Barciaga, Nina Müthing, Maria Datcheva, Tom Schanz
http://dx.doi.org/10.1007/978-3-319-52590-7_12

Nano-indentation investigations of the mechanical properties of thin TiO2, WO3 and their composites layers, deposited by spray pyrolysis
Journal Article published 2017 Feb 14 in Materiali in tehnologije volume 51 issue 1 on pages 75 to 83
Authors: Sabina Cherneva, Roumen Iankov, Nenad Radic, Bosko Grbic, Maria Datcheva, Dimitar Stoychev
http://dx.doi.org/10.17222/mit.2015.216

Microstructure and mechanical properties of stress-tailored piezoelectric AlN thin films for electro-acoustic devices
Journal Article published 2017 Jun in Applied Surface Science volume 407 on pages 307 to 314
Authors: Markus Reusch, Sabina Cherneva, Yuan Lu, Agnė Žukauskaitė, Lutz Kirste, Katarzyna Holc, Maria Datcheva, Dimitar Stoychev, Vadim Lebedev, Oliver Ambacher
http://dx.doi.org/10.1016/j.apsusc.2017.02.147

Axisymmetric analysis of multilayered thermoelastic media with application to a repository for heat-emitting high-level nuclear waste in a geological formation
Journal Article published 2016 May 20 in Geophysical Journal International volume 206 issue 2 on pages 1144 to 1161
Authors: Yang Yang, Maria Datcheva, Tom Schanz
http://dx.doi.org/10.1093/gji/ggw194

Stability and serviceability of underground energy storage caverns in rock salt subjected to mechanical cyclic loading
Journal Article published 2016 Jul in International Journal of Rock Mechanics and Mining Sciences volume 86 on pages 115 to 131
Authors: Kavan Khaledi, Elham Mahmoudi, Maria Datcheva, Tom Schanz
http://dx.doi.org/10.1016/j.ijrmms.2016.04.010

Analysis of compressed air storage caverns in rock salt considering thermo-mechanical cyclic loading
Journal Article published 2016 Aug in Environmental Earth Sciences volume 75 issue 15
Authors: Kavan Khaledi, Elham Mahmoudi, Maria Datcheva, Tom Schanz
http://dx.doi.org/10.1007/s12665-016-5970-1

Global and local sensitivity analyses for coupled thermo-hydro-mechanical problems
Journal Article published 2016 Sep 8 in International Journal for Numerical and Analytical Methods in Geomechanics volume 41 issue 5 on pages 707 to 720
Authors: Long Nguyen-Tuan, Tom Lahmer, Maria Datcheva, Tom Schanz
http://dx.doi.org/10.1002/nag.2573

Rigorous solution for 1-D consolidation of a clay layer under haversine cyclic loading with rest period
Journal Article published 2016 Nov 17 in SpringerPlus volume 5 issue 1
Authors: Nina Müthing, Sabah S. Razouki, Maria Datcheva, Tom Schanz
http://dx.doi.org/10.1186/s40064-016-3660-9

A novel parameter identification approach for buffer elements involving complex coupled thermo-hydro-mechanical analyses
Journal Article published 2016 Jun in Computers and Geotechnics volume 76 on pages 23 to 32
Authors: Long Nguyen-Tuan, Tom Lahmer, Maria Datcheva, Eugenia Stoimenova, Tom Schanz
http://dx.doi.org/10.1016/j.compgeo.2016.02.005

Sensitivity analysis and parameter identification of a time dependent constitutive model for rock salt
Journal Article published 2016 Feb in Journal of Computational and Applied Mathematics volume 293 on pages 128 to 138
Authors: K. Khaledi, E. Mahmoudi, M. Datcheva, D. König, T. Schanz
http://dx.doi.org/10.1016/j.cam.2015.03.049

Parameter Identification of a Rate Dependent Constitutive Model for Rock Salt
Book Chapter published 2015 in Numerical Methods and Applications on pages 207 to 216
Authors: Kavan Khaledi, Elham Mahmoudi, Maria Datcheva, Tom Schanz
http://dx.doi.org/10.1007/978-3-319-15585-2_23

Micromechanical testing of the dentin hybrid zone formed by all-in-one adhesive system in sound human dentin
Proceedings Article published 2015
Authors: E. Koytchev, M. Datcheva, R. Iankov
http://dx.doi.org/10.1063/1.4934291

Constitutive Parameter Adjustment for Mechanized Tunneling with Reference to Sub-system Effects
Book Chapter published 2015 in Numerical Methods and Applications on pages 217 to 225
Authors: Chenyang Zhao, Arash Alimardani Lavasan, Thomas Barciaga, Raoul Hölter, Maria Datcheva, Tom Schanz
http://dx.doi.org/10.1007/978-3-319-15585-2_24

Model validation and calibration via back analysis for mechanized tunnel simulations – The Western Scheldt tunnel case
Journal Article published 2015 Sep in Computers and Geotechnics volume 69 on pages 601 to 614
Authors: Chenyang Zhao, Arash Alimardani Lavasan, Thomas Barciaga, Veselin Zarev, Maria Datcheva, Tom Schanz
http://dx.doi.org/10.1016/j.compgeo.2015.07.003

Nanomechanical testing of thin composite layers – Application to Pd-In electrochemically deposited thin films
Proceedings Article published 2015
Authors: G. Chalakova, M. Datcheva, R. Zaharieva, M. Georgiev, Ts. Dobrovolska, D. Stoychev
http://dx.doi.org/10.1063/1.4934286

Finite-element modeling of the behavior of underground caverns excavated in rock salt
Book Chapter published 2014 May 19 in Numerical Methods in Geotechnical Engineering on pages 845 to 850
Authors: K Khaledi, T Schanz, M Datcheva
http://dx.doi.org/10.1201/b17017-151

On the influence of loading frequency on the pore-water dissipation behavior during cyclic consolidation of soft soils
Book Chapter published 2014 Sep 4 in Computer Methods and Recent Advances in Geomechanics on pages 441 to 445
Authors: N Müthing, T Schanz, M Datcheva
http://dx.doi.org/10.1201/b17435-74

Comparison of Measured and Predicted Suction Stress in Partially Saturated Compacted Mixtures of Sand and Clay
Journal Article published 2014 in Vadose Zone Journal volume 0 issue 0 on page 0
Authors: A. Pourzargar, D. König, G. Heibrock, M. Datcheva, T. Schanz
http://dx.doi.org/10.2136/vzj2013.06.0114

Parameter identification for a thermo-hydro-mechanical model of the buffer material
Book Chapter published 2014 May 19 in Numerical Methods in Geotechnical Engineering on pages 1001 to 1006
Authors: L Nguyen-Tuan, T Schanz, M Datcheva, E Stoimenova
http://dx.doi.org/10.1201/b17017-178

The influence of the soil constitutive model on the numerical assessment of mechanized tunneling
Book Chapter published 2014 May 19 in Numerical Methods in Geotechnical Engineering on pages 889 to 894
Authors: K Vakili, A Lavasan, T Schanz, M Datcheva
http://dx.doi.org/10.1201/b17017-158

Heat transfer in a geothermal heat-pump system – an analytical assessment
Journal Article published 2014 Apr 29 in Géotechnique Letters volume 4 issue 2 on pages 139 to 144
Authors: Y. Yang, M. Datcheva, D. König, T. Schanz
http://dx.doi.org/10.1680/geolett.13.00055

Finite Element modeling of the behavior of salt caverns under cyclic loading
Book Chapter published 2014 Aug 26 in Geomechanics from Micro to Macro on pages 945 to 950
Authors: K Khaledi, E Mahmoudi, T Schanz, M Datcheva
http://dx.doi.org/10.1201/b17395-169

Identification of a fault zone ahead of the tunnel excavation face using the extended Kalman filter
Journal Article published 2013 Oct in Mechanics Research Communications volume 53 on pages 47 to 52
Authors: Luan T. Nguyen, Maria Datcheva, Tamara Nestorović
http://dx.doi.org/10.1016/j.mechrescom.2013.08.003

Thermo-Hydro Mechanical Column Experiment to Study Expansive Soil Behaviour
Book Chapter published 2013 in Springer Series in Geomechanics and Geoengineering on pages 125 to 130
Authors: Tom Schanz, Long Nguyen-Tuan, Maria Datcheva
http://dx.doi.org/10.1007/978-3-642-32492-5_13

A Column Experiment to Study the Thermo-Hydro-Mechanical Behaviour of Expansive Soils
Journal Article published 2013 Jan 17 in Rock Mechanics and Rock Engineering volume 46 issue 6 on pages 1287 to 1301
Authors: Tom Schanz, Long Nguyen-Tuan, Maria Datcheva
http://dx.doi.org/10.1007/s00603-012-0361-8

Numerical modeling and inverse parameter estimation of the large-scale mass movement Gradenbach in Carinthia (Austria)
Journal Article published 2013 Feb 13 in Acta Geotechnica volume 8 issue 4 on pages 355 to 371
Authors: Jörg Meier, Michael Moser, Maria Datcheva, Tom Schanz
http://dx.doi.org/10.1007/s11440-013-0211-1

Cyclic consolidation of soft soils
Book Chapter published 2013 Nov 28 in Aktuelle Forschung in der Bodenmechanik 2013 on pages 77 to 87
Authors: Nina Müthing, Lars Röchter, Maria Datcheva, Tom Schanz
http://dx.doi.org/10.1007/978-3-642-37542-2_5

Analytical solution for 1D consolidation under haversine cyclic loading
Journal Article published 2013 Apr 7 in International Journal for Numerical and Analytical Methods in Geomechanics volume 37 issue 14 on pages 2367 to 2372
Authors: Sabah S. Razouki, Paul Bonnier, Maria Datcheva, Tom Schanz
http://dx.doi.org/10.1002/nag.2188

Finite Element Simulation of Nanoindentation Process
Book Chapter published 2013 in Lecture Notes in Computer Science on pages 319 to 326
Authors: Roumen Iankov, Maria Datcheva, Sabina Cherneva, Dimiter Stoychev
http://dx.doi.org/10.1007/978-3-642-41515-9_35

Identification of constitutive parameters of soil using an optimization strategy and statistical analysis
Journal Article published 2013 Apr in Computers and Geotechnics volume 49 on pages 143 to 157
Authors: T. Knabe, M. Datcheva, T. Lahmer, F. Cotecchia, T. Schanz
http://dx.doi.org/10.1016/j.compgeo.2012.10.002

Determination of Anodized Aluminum Material Characteristics by Means of Nano-Indentation Measurements
Journal Article published 2011 in Materials Sciences and Applications volume 02 issue 10 on pages 1452 to 1464
Authors: Maria Datcheva, Sabina Cherneva, Maria Stoycheva, Roumen Iankov, Dimitar Stoychev
http://dx.doi.org/10.4236/msa.2011.210196

Seismic wave propagation in laterally inhomogeneous poroelastic media via BIEM
Journal Article published 2010 Nov 23 in International Journal for Numerical and Analytical Methods in Geomechanics volume 36 issue 2 on pages 111 to 127
Authors: Petia Dineva, Maria Datcheva, George Manolis, Tom Schanz
http://dx.doi.org/10.1002/nag.995

Identification of coupled hydro-mechanical parameters with application to engineered barrier systems
Book Chapter published 2008 Jun 23 in Unsaturated Soils. Advances in Geo-Engineering on pages 797 to 803
Authors: T Schanz, M Zimmerer, M Datcheva
http://dx.doi.org/10.1201/9780203884430.ch109

A sub-stepping approach for elasto-plasticity with rotational hardening
Journal Article published 2005 Jul 14 in Computational Mechanics volume 37 issue 3 on pages 266 to 278
Authors: W. Wang, M. Datcheva, T. Schanz, O. Kolditz
http://dx.doi.org/10.1007/s00466-005-0710-5

Sharp Bounds for Strains and Stresses in Uncertain Mechanical Models
Book Chapter published 2004 in Large-Scale Scientific Computing on pages 262 to 269
Authors: Evgenia D. Popova, Maria Datcheva, Roumen Iankov, Tom Schanz
http://dx.doi.org/10.1007/978-3-540-24588-9_29

Anisotropic bounding surface plasticity with rotational hardening for unsaturated frictional materials
Journal Article published 2003 Mar in Journal de Physique IV (Proceedings) volume 105 on pages 305 to 312
Authors: M. Datcheva, T. Schanz
http://dx.doi.org/10.1051/jp4:20030201

Constitutive Equations and Numerical Modelling of Time Effects in Soft Porous Rocks
Book Chapter published 2001 in Lecture Notes in Computer Science on pages 222 to 229
Authors: M. Datcheva, R. Charlier, F. Collin
http://dx.doi.org/10.1007/3-540-45262-1_27

Investigation of the influence of surface roughness on metal forming processes
Journal Article published 2000 Jul in Mechanics Research Communications volume 27 issue 4 on pages 393 to 402
Authors: O. Mahrenholtz, N. Bontcheva, R. Iankov, M. Datcheva
http://dx.doi.org/10.1016/s0093-6413(00)00109-9

Constitutive Equations for Time Depending Behavior of Type Loading Sensitive Materials
Book Chapter published 1998 in Progress and Trends in Rheology V on pages 92 to 95
Authors: A. Baltov, M. Datcheva
http://dx.doi.org/10.1007/978-3-642-51062-5_37

Influence of the different behaviour at tension and compression on density distribution of porous metals
Journal Article published 1996 Sep in Mechanics Research Communications volume 23 issue 5 on pages 537 to 542
Authors: N. Bontcheva, R. Iankov, M. Datcheva
http://dx.doi.org/10.1016/0093-6413(96)00054-7

Numerical examination of the process of damage in creep of metals
Journal Article published 1992 in Soviet Materials Science volume 28 issue 5 on pages 429 to 432
Authors: R. Yankov, M. Dacheva
http://dx.doi.org/10.1007/bf00729030

Model representation of the ultimate strain during creep
Journal Article published 1985 in Journal of Applied Mechanics and Technical Physics volume 25 issue 4 on pages 632 to 635
Authors: M. D. Dacheva, A. M. Lokoshchenko, S. A. Shesterikov
http://dx.doi.org/10.1007/bf00910004

Statistical approach in soil-water characteristic curve modelling
Book Chapter published in Springer Proceedings in Physics on pages 189 to 200
Authors: Eugenia Stoimenova, Maria Datcheva, Tom Schanz
http://dx.doi.org/10.1007/3-540-26737-9_14

Three-Dimensional Finite-Element Analysis of Mechanized Shield Tunneling in Urban Areas
Proceedings Article published in Proceedings of the Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing
Authors: V. Zarev, T. Schanz, M. Datcheva
http://dx.doi.org/10.4203/ccp.96.223

Numerical Investigation and Back Analysis for High Swelling Pressure in Constant Volume Test
Proceedings Article published in Proceedings of the Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing
Authors: L. Nguyen-Tuan, M. Datcheva, M.I. Khan, T. Schanz
http://dx.doi.org/10.4203/ccp.96.204