Published: 21 April 2021
If a calculation does not run as smoothly as you expected, or it appears that the phase calculation does not convergence, it was sometimes a bit difficult to understand why this is the case. Since the release of PLAXIS 2D/3D CONNECT Edition V21, inspecting these details is now a lot easier using the Calculation Log Collector! You can inspect any phase by just selecting the option from the Phases Explorer or Phases Window:
Figure 1: select Converge Log from the Phases Explorer and Phases Window
And if you want to access it while the phase is still calculating, you can now launch it directly from the Calculation Progress Screen:
Figure 2: select Converge Log during the Calculation for live updating of the log
The Calculation Log Collector will give you all the details on the convergence process, as shown here below:
Figure 3: Example of the Converge Log
For all details, please read the attached manual PLAXIS_CE_V21_00_Calculation Log Collector.pdf
Source: Bentley Communities
Categories
Finite Element / Finite Difference
Keywords
PLAXIS, PLAXIS3D, PLAXIS2D
Form
Looking for more information? Fill in the form and we will contact Bentley Systems for you. Alternatively, you can visit Bentley's website and speak with a Bentley Geotechnical Expert.