Geotechnical Questions with the tag: Geotechnical Earthquake Engineering & Soil Dynamics
Welcome to the GeoWorld's Q&A!
Here you can find information on a wide variety of geotechnical topics. You can ask questions and get answers from real experts, geoprofessionals and members of GeoWorld. You can also browse through the questions, post your answers about topics you are familiar with, and rate the answers of other members.
Take active part in the Q&A!
By participating in the new GeoWorld's Q&A you will benefit by learning and networking and may be recognized as a Q&A expert.
Need help on using GeoWorld's Q&A? See our guide here
-
I have a question related to point movement simulation by load multiplier. i would like to know according to whar the multipier will be assigned to th…Last answered 17/11/2023 06:32, updated: 15/12/2023 07:22 by Lojain Suliman
2Answers
-
What is the most effective method to market products to Geotechnical Engineers?Last answered 08/04/2023 12:58, updated: 09/09/2023 10:56 by David Nutakor
1Answer
-
Hi! I have to run a dynamic analysis in Plaxis 2D and need to determine HS small parameters having only SPT and CPT. Is it possible? which is the best…Asked 24/02/2023 09:36 by Someone
0Answers
-
What is your opinion on Core-GS software ? www.geroc.bizAsked 08/06/2022 22:16 by . www.geroc.biz .
0Answers
-
Hello, I have a question about the soil's internal friction angle in the DYNAMIC ANALYSIS. Whenever we perform dynamic analysis in Plaxis, we have t…Last answered 30/03/2022 09:23, updated: 10/09/2023 07:10 by Sally Simpson
1Answer
-
Please what is the effect of spreading sharp sand in a house foundation before pouring your concrete or before blinding ? Asked 11/03/2022 06:16 by Alexander Apochi George
0Answers
-
Please can someone assist me with GIS water project? It's for academic purposesAsked 08/12/2021 04:32, updated: 08/12/2021 04:33 by Simbarashe Thondhlana
0Answers
-
Hi I have a simulation performed by plaxis 2013, which collapses and it does not converge properly. I would appreciate it if someone could give me …Last answered 26/07/2021 16:42, updated: 09/09/2023 10:37 by Micha Van der Sloot
3Answers
-
As my load cell showed an initial value of around 300N, zeroing was done. After zeroing, a negative value (-5 N) is read. Can I proceed with…Last answered 25/01/2021 10:17, updated: 09/09/2023 10:55 by Someone
2Answers
-
I need a Geotechnical professional in the industry who can help me with an internship offer or opportunity either at site or laboratory level. Compens…Asked 14/06/2020 12:11 by Stephen Morakinyo Adeyinka
0Answers
Q&A Experts
Director, User Success, Geotechnical at Seequent, the Bentley Subsurface Company
4
Posts
0
Upvotes
3
Posts
1
Upvote
2
Posts
0
Upvotes