Geotechnical Questions with the tag: Design
Welcome to the GeoWorld's Q&A!
Here you can find information on a wide variety of geotechnical topics. You can ask questions and get answers from real experts, geoprofessionals and members of GeoWorld. You can also browse through the questions, post your answers about topics you are familiar with, and rate the answers of other members.
Take active part in the Q&A!
By participating in the new GeoWorld's Q&A you will benefit by learning and networking and may be recognized as a Q&A expert.
Need help on using GeoWorld's Q&A? See our guide here
-
1. The large-scale slope stability check is acceptable. 2. Why is there displacement at the heel of the retaining wall? 3. Although overall…Asked 13/01/2025 09:13 by Someone
0Answers
-
hello guys i'm trying to simulate a cubic frame with circular bars with 2 cm diameter and after that i want to raped this cubic frame with geotex…Asked 02/11/2024 15:11 by Milad Sabouri
0Answers
-
I am wondering what governs the estimation of safety factors in geotechnical design, Like why it is around 1.5 in slopes for example and around 3 in b…Asked 22/10/2024 08:38 by Fayrouz Yasser
0Answers
-
I hope this message finds you well. My name is Julien Babarindé KOUDORO, and I hold an Engineering Degree in Civil Engineering, with a specialization…Asked 20/10/2024 14:58 by Julien Babarinde Koudoro
0Answers
-
Is it advisable to do the exploratory drill holes in the tunnel alignment as it would puncture the tunnel and then we have to fill the hole by groutin…Last answered 20/07/2024 04:31, updated: 20/07/2024 05:21 by SAILENDRA SINGH BARIHA
2Answers
-
Ok, this one might be a bit obvious but I have trouble understanding it. What is the exact purpose of PLAXIS interfaces and when do we have to use …Last answered 12/01/2024 07:23 by Micha Van der Sloot
1Answer
-
I have a question related to point movement simulation by load multiplier. i would like to know according to whar the multipier will be assigned to th…Last answered 17/11/2023 06:32, updated: 15/12/2023 07:22 by Lojain Suliman
2Answers
-
Hello, I have a question about the soil's internal friction angle in the DYNAMIC ANALYSIS. Whenever we perform dynamic analysis in Plaxis, we have t…Last answered 30/03/2022 09:23, updated: 10/09/2023 07:10 by Sally Simpson
1Answer
-
Please what is the effect of spreading sharp sand in a house foundation before pouring your concrete or before blinding ? Asked 11/03/2022 06:16 by Alexander Apochi George
0Answers
-
Can you advise me about the different pressuremeter testing devices and their advantages and disadvantages???Last answered 04/01/2022 14:29, updated: 10/09/2023 07:11 by Stephen Buttling
1Answer
Q&A Experts
3
Posts
1
Upvote
2
Posts
0
Upvotes
1
Posts
1
Upvote